| Technical parameters of coated steel flat belts | |||||
| Specification / Part number | Width/mm | Thickness/mm | No. of wire core | Pull | Appearance |
| AAA717X1 | 30 | 3 | 12 | 32KN | Smooth surfaced on two surfaces |
| AAA717W1 | 30 | 3 | 12 | 32KN | ‘V’ lines on single surface |
| AAA717AM2 | 30 | 3.2 | 10 | 43KN | Smooth surfaced on two surfaces |
| AAA717AP2 | 30 | 3.2 | 10 | 43KN | Smooth surfaced on two surfaces |
| AAA717AJ2 | 30 | 3.2 | 10 | 43KN | Smooth surfaced on two surfaces |
| AAA717AD1 | 60 | 3 | 24 | 64KN | Smooth surfaced on two surfaces |
| AAA717R1 | 60 | 3 | 24 | 64KN | ‘W’ lines on single surface |
| AAA717AJ1 | 25 | 3.2 | 8 | 32KN | Smooth surfaced on two surfaces |
Pictures for Otis Elevator Lift GEN2 Traction Machine Steel Belt 30mm AAA717AM2
Replacement of elevator steel belts
The elevator steel belt should be replaced as a whole. If a set of elevator steel belts is found during the elevator installation process or before the elevator is put into use.
Our products are sold all over the world, you can rest assured.
