OTIS GAA177HB5 Leveling Sensor Door Zone Sensor with Non-Contact Hall Sensing and Threaded Cylindrical Probe for OTIS 3100 Elevators

Brand Name: OTIS
Model Number: GAA177HB5
Minimum Order Quantity: 1
Delivery Time: 3-7WorkingDays
Payment Terms: T/T,D/P,D/A,L/C
Inquiry Now
Get A Quote
Specifications
Highlight Features

Non-Contact Hall Sensing Leveling Sensor

,

Threaded Cylindrical Probe Door Zone Sensor

,

OTIS 3100 Compatibility Leveling Sensor

Working Principle:
Hall-effect Magnetic Sensing
Output Signal:
Switching Output (DZI)
Supply Voltage:
DC24V
Probe Type:
Threaded Cylindrical
Cable Cores:
3-core
Sensing Gap:
Adjustable Via Lock Nut
Product Description
OTIS Leveling Sensor GAA177HB5 - Product Information Sheet
Elevator Leveling / Door Zone Sensor | Supplier: Sulab (Xi'an) Elevator Co., Ltd. | Rev. 2026-11-19
Category Item Content / Specification Notes / Remarks
1. PRODUCT DESCRIPTION
1. Product
Description
Product Name Leveling Sensor / Hall Effect Leveling Switch (Door Zone Sensor) OTIS part-number series; also known in the market as leveling photoelectric / Hall switch
Model No. GAA177HB5
(also written GAA-177-HB5)
Series covers HB1 to HB6, distinguished by colour mark, output state and magnet polarity
Brand OTIS (original part number) Compatible aftermarket equivalents also available; confirm OEM or replacement before ordering
Category Elevator electrical system - position sensor (leveling / door zone detection) Signal-acquisition electrical part, not a safety component
Working Principle Hall-effect magnetic sensing, non-contact. The probe works with the door-zone magnet strip (N pole); magnetic flux change as the car enters the door zone triggers a switching output No mechanical contact, no contact wear
Main Function Supplies a door-zone position reference (DZI, Door Zone Indicator) to the elevator controller for leveling, speed change, re-leveling and open-door-zone judgement Mis-sensing shows up directly as inaccurate leveling or wrong door-zone judgement
Application OTIS 3100 / 3100VF elevators and other OTIS units using the same Hall-effect leveling assembly; also suitable for position / limit detection in industrial automation Check the original part number and colour mark before using on another model
Matching Parts Door-zone magnet strip / magnet (N pole)
GAA621BV-1 DC24V regulated power supply (matched supply of the Hall leveling assembly)
Mounting bracket / fixing plate
Used as a complete assembly; replacing the probe alone may leave a gap mismatch
Features Non-contact Hall sensing, high reliability and good noise immunity; threaded cylindrical probe with lock nut for adjustable position and sensing gap; direct replacement for the same imported model with short lead time and competitive price First-article trial fitting recommended for replacement parts
Appearance Red threaded cylindrical probe + lock nut + lead cable (3-core, cable length per actual unit), with OTIS label Threaded through-panel mounting, probe face aligned to the magnet strip
Scenarios New installations, modernization, maintenance spare parts, overseas project supply Maintenance buyers usually order single units; projects order in batches


Related Products
Send An Inquiry