3300 Elevator Push Button Pcb Board SCOPBTA 5.Q ID.NR.594104

Details for  3300 Elevator Push Button Pcb Board SCOPBTA 5.Q ID.NR.594104

Pictures for  3300 Elevator Push Button Pcb Board SCOPBTA 5.Q ID.NR.594104

3300 elevator common codes and errors

1. The distance between the upper station magnet and the top magnetic shielding plate from the KSE of the inspection shaft is 1250cm, the length of the magnetic shielding plate is 240cm, the magnetism is N pole, the distance between the lower station magnet and the bottom magnetic shielding plate is 1250cm, and the length of the magnetic shielding plate is 240cm. Magnetic is S pole.

2. Safety loops, 4 * all lights can move the car.
01: The specific meaning of the current state on the right side of the door-to-door state of the BB machine is as follows:
00: JAB, lock the ladder
01: normal
02: Independence
03: Fire Fighting
04: Fire Fighting
05: Emergency electric operation
06: Earthquake
10: Driver
11: Weighing is turned off under normal operation
39: Overload
40: Card lost

Elevator PCB Board - FAQ

Q1: How do I identify the correct replacement elevator PCB board?
To identify a replacement elevator PCB board, check the original part number, hardware revision, board markings, and elevator controller model. Clear photos of both sides of the PCB can help distinguish different versions.

Q2: Can elevator PCB boards with similar part numbers be interchangeable?
Not necessarily. Elevator PCB boards with similar part numbers may differ in hardware revisions, firmware, connector layouts, or communication protocols. Compatibility must be verified against the existing elevator system.

Q3: Does a replacement elevator PCB board require programming?
Some replacement PCB boards require firmware configuration, parameter settings, or system-specific programming. Others may already contain the required software. The correct procedure depends on the PCB model and its role in the elevator control system.

Q4: Can a faulty elevator PCB board be replaced without changing the complete control system?
In some cases, an individual PCB can be replaced if the replacement is compatible with the existing controller, firmware, wiring, and connected components. A qualified technician should confirm the fault before deciding on replacement.

Q5: What information should I provide when sourcing a replacement elevator PCB board?
Please provide the original PCB part number, hardware revision, elevator model, clear board photos, and required quantity. SULAB can help review these details and check available replacement options.