Quick Link
Quick Contact
Address
Wanda Square Plaza, Weiyang district, Xi'an City, Shaanxi China
Tel
86--15109261813
Our Newsletter
Subscribe to our newsletter for discounts and more.
Details for OTIS Elevator Lift OVF30 Drive Inverter PCB Board ABA26800XU2 ABA26800XU1
| Brand | OT |
| Description | Elevator Circuit PCB Board |
| Part No. | ABA26800XU2 |
| MOQ | 1PC |
| Transportion | TNT, UPS, DHL, Fedex, Air, Sea |
| Applicable | Elevator |
| Packages | Carton, Wooden case, Pallet etc |
| Delivery Time | Normally 2-3 working days after payment |
| Warranty | One year |
| Payment Method | Company Bank, Western union, alibaba, Paypal, Personal bank etc |
Pictures for OTIS Elevator Lift OVF30 Drive Inverter PCB Board ABA26800XU2 ABA26800XU1

OVF30 inverter is an inverter equipped in the 300VF control system of early OTIS elevators. Due to its long service life (at least 10 years), the probability of damage to the ABA26800XU1 (or XU2) board in the inverter is relatively high. I have repaired it. There are also a lot of frequency converters. Now I will share with you the faults that are easy to damage and not easy to find. If there are any shortcomings, please point out.
Fault 1: The power on is normal, the main board of the inverter displays X04A, and the maintenance is started. The UDX light on this board keeps on and off, and the UDX relay keeps pulling and closing, and the BRK light is not on.
Fault point: This fault is generally caused by a problem with the IGBT drive signal circuit to the drive board, generally caused by the increase in the resistance value of R118-R124=499 ohm resistors, and the problem can be solved by replacing the bad resistors.
Q1: How do I identify the correct replacement elevator PCB board?
To identify a replacement elevator PCB board, check the original part number, hardware revision, board markings, and elevator controller model. Clear photos of both sides of the PCB can help distinguish different versions.
Q2: Can elevator PCB boards with similar part numbers be interchangeable?
Not necessarily. Elevator PCB boards with similar part numbers may differ in hardware revisions, firmware, connector layouts, or communication protocols. Compatibility must be verified against the existing elevator system.
Q3: Does a replacement elevator PCB board require programming?
Some replacement PCB boards require firmware configuration, parameter settings, or system-specific programming. Others may already contain the required software. The correct procedure depends on the PCB model and its role in the elevator control system.
Q4: Can a faulty elevator PCB board be replaced without changing the complete control system?
In some cases, an individual PCB can be replaced if the replacement is compatible with the existing controller, firmware, wiring, and connected components. A qualified technician should confirm the fault before deciding on replacement.
Q5: What information should I provide when sourcing a replacement elevator PCB board?
Please provide the original PCB part number, hardware revision, elevator model, clear board photos, and required quantity. SULAB can help review these details and check available replacement options.