Kone Elevator Lift PCB Board Communication CEB PCB Board KM713730G01

Details for Kone Elevator Lift Communication CEB PCB Board KM713730G01

Pictures for Kone Elevator Lift Communication CEB PCB Board KM713730G01

The serial number of the car top board installed on the car top of KONE elevator is divided into 713710G01 or G11, the communication interface board, the leveling switch on the car top, some switches are all connected to this circuit board, and there are currently 802850G11, 802890G11 series circuit boards , These CCBN boards are used to replace the early car top board, and the car top is also equipped with a door operator control circuit board, the serial numbers are 602810G02, 603810G01, 601810G01. At present, 606810G01 can replace 601810G01. When using instead, you need to short-circuit two power cables. Pin 4 of X9 is connected to pin 2 of X19, and pin 1 of X9 is connected to pin 3 of X19.

Elevator PCB Board - FAQ

Q1: How do I identify the correct replacement elevator PCB board?
To identify a replacement elevator PCB board, check the original part number, hardware revision, board markings, and elevator controller model. Clear photos of both sides of the PCB can help distinguish different versions.

Q2: Can elevator PCB boards with similar part numbers be interchangeable?
Not necessarily. Elevator PCB boards with similar part numbers may differ in hardware revisions, firmware, connector layouts, or communication protocols. Compatibility must be verified against the existing elevator system.

Q3: Does a replacement elevator PCB board require programming?
Some replacement PCB boards require firmware configuration, parameter settings, or system-specific programming. Others may already contain the required software. The correct procedure depends on the PCB model and its role in the elevator control system.

Q4: Can a faulty elevator PCB board be replaced without changing the complete control system?
In some cases, an individual PCB can be replaced if the replacement is compatible with the existing controller, firmware, wiring, and connected components. A qualified technician should confirm the fault before deciding on replacement.

Q5: What information should I provide when sourcing a replacement elevator PCB board?
Please provide the original PCB part number, hardware revision, elevator model, clear board photos, and required quantity. SULAB can help review these details and check available replacement options.