OEM Kone Elevator PCB Board Lift Communication LECCOB PCB Board KM713720G01

Details for Kone Elevator Lift Communication LECCOB PCB Board KM713720G01

Pictures for Kone Elevator Lift Communication LECCOB PCB Board KM713720G01

There are several boards in the car of KONE elevator, they are the main board of the car, the serial numbers are 713720G01, 713720G11, when the number of floors exceeds 8, a sub board is installed, the serial numbers are 713730G01, 713730G11, there is a very old one. The ladder is plugged into the port of the button cable, and the middle two feet of the button ports of the two boards should be hooked up. The car display circuit board is 713560G01, and the current 853300G01. The G word on the display board generally represents the color displayed.

Elevator PCB Board - FAQ

Q1: How do I identify the correct replacement elevator PCB board?
To identify a replacement elevator PCB board, check the original part number, hardware revision, board markings, and elevator controller model. Clear photos of both sides of the PCB can help distinguish different versions.

Q2: Can elevator PCB boards with similar part numbers be interchangeable?
Not necessarily. Elevator PCB boards with similar part numbers may differ in hardware revisions, firmware, connector layouts, or communication protocols. Compatibility must be verified against the existing elevator system.

Q3: Does a replacement elevator PCB board require programming?
Some replacement PCB boards require firmware configuration, parameter settings, or system-specific programming. Others may already contain the required software. The correct procedure depends on the PCB model and its role in the elevator control system.

Q4: Can a faulty elevator PCB board be replaced without changing the complete control system?
In some cases, an individual PCB can be replaced if the replacement is compatible with the existing controller, firmware, wiring, and connected components. A qualified technician should confirm the fault before deciding on replacement.

Q5: What information should I provide when sourcing a replacement elevator PCB board?
Please provide the original PCB part number, hardware revision, elevator model, clear board photos, and required quantity. SULAB can help review these details and check available replacement options.