Hyundai Elevator STVF9 Type Motherboard WBVF-N V1.1 Frequency Divider Board WBVF SIN ISO CC-961 In Stock

Hyundai Elevator STVF9 Type Motherboard WBVF-N V1.1 Frequency Divider Board WBVF SIN ISO CC-961 In Stock

Use the factory remote control to press the factory debugging key (3FH key) to enter the factory mode.

First, reduce the sound to 0, then hold down the "Sound -" key on the keypad and press the "Screen Display" key or the "Back" key on the remote control to enter the factory mode. In the factory debugging menu, press the "Back" key on the remote control, or press the factory debugging key (3F key) again to exit the factory debugging menu.

White Balance Adjustment: Enter the factory menu and select the white balance adjustment item. Press the right key to enter the white balance adjustment sub-menu. Use a white balance meter for detection. If there is a deviation, you can press the channel + / - keys to select R Gain, G Gain, B Gain, R Offset, G Offset, B Offset, and then press the left and right keys for adjustment to achieve the best effect.

Single Key Mode Setting: Press the left/right keys to set the single key mode to "On" or "Off".

Startup LOGO Setting: Press the left/right keys to set the startup LOGO to "On" or "Off". When it is set to "On", the LOGO will be displayed during startup, and when it is set to "Off", the LOGO will not be displayed during startup.

Reset Flag Setting: Press the left/right keys to set it to "Standard Initialization" or "Initialize All Data". The difference between the two is that "Initialize All Data" will re-initialize the white balance data, while "Standard Initialization" will not perform this action. After setting this flag, if a reset action is required, press the right key in the "Reset" line to start the reset. The HDMI KEY and barcode information will not be reset during the reset process.