Elevator Car Call Communication Board Elevator Car Control Board COP30D-N2

Elevator car call communication board elevator car control board COP30D-N2

Functional features
Passenger operation interface: As the control panel in the car, it provides passengers with an interface for interacting with the elevator, including floor selection buttons, door opening/closing buttons, emergency call buttons, etc., which facilitate passengers to operate the elevator and realize floor selection and basic control functions of the elevator.
Status display: It can display the current operating status of the elevator, such as the floor, running direction, door opening and closing status, etc., so that passengers can clearly understand the operation of the elevator.
Signal transmission and processing: Receive passenger operation instructions and transmit these instructions to the elevator control system, and receive feedback signals from the elevator control system to achieve precise control and safe operation of the elevator.
Fault diagnosis and alarm: It has certain fault diagnosis functions. When the elevator fails or abnormal conditions occur, it can detect and send alarm signals in time, and feedback the fault information to the elevator maintenance personnel to facilitate fault detection and repair.

Installation and maintenance
Installation location: Generally installed in the control box inside the elevator car, which is convenient for passengers to operate and observe. When installing, it is necessary to fix it firmly to avoid damage due to vibration or collision.
Wiring requirements: Strictly follow the wiring diagram provided by the elevator manufacturer to ensure that the power line, communication line, button line, etc. are connected correctly to avoid problems such as short circuit and open circuit.
Maintenance: Clean the car door control panel regularly to prevent dust and debris from entering and affecting its normal operation. Check whether the buttons, display screen, etc. on the control panel are working properly, and replace them in time if damaged. At the same time, regularly check whether the communication line and power line are well connected to ensure that the communication between the control panel and the elevator main control system is normal.